単発パック $4.99 から

TRELLIS.2 画像→3D 生成器(trellis-2)

画像をアップロードして3Dモデル生成。GLB + PBR で書き出し。

TRELLIS.2 Studio

TRELLIS.2 Studio

Use a publicly accessible URL (jpg/png/webp/gif/avif). 先に端末内の画像を選びます。ログインは生成ボタンを押すときだけ。それまではこの端末に残ります。

Preview

Ready to Generate

Cost 150 credits

512³モデル1つは150クレジットです。Miniパックは$4.99で1モデル、Proは$38で20モデル(1つあたり約$1.90)。単発支払いで、クレジットは無期限、失敗したタスクはクレジットを返還します。

単体がはっきり写った画像から始める

正面または斜め前のきれいな画像ほど、形状とテクスチャが安定します。

出力
GLB + PBR
目安
1-3分
用途
ゲーム、VR、Blender
  • 単体の被写体、複雑な背景は避ける
  • JPG、PNG、WebP、GIF、AVIF のURL
  • 推奨は512メッシュと2048テクスチャ
  • GLB準備中はページを開いたままにする

よくある質問

512³の生成は150クレジット、1024³は300クレジット、1536³は500クレジットを消費します。各プランはチェックアウト前に解像度ごとの上限回数を明示します。


1アカウントにつき画像→3Dジョブを同時に2件まで実行できます。完了または失敗したジョブは枠を解放し、失敗したジョブは予約クレジットを自動で返還します。


ホスト型生成はクレジット制です。開始前に残高と正確なコストが表示されます。単発パックの有効期限はなく、失敗したタスクは予約クレジットを返還し、各プランには 512³ / 1024³ / 1536³ モデルの生成可能数が記載されています。


返金のご依頼は [email protected] へ、購入日から3日以内にお送りください。購入したクレジットやサブスク特典を使用した後は返金対象外です。承認された返金は、決済パートナーが請求する手数料を差し引いて支払われます。手順は返金ポリシーのページに記載しています。


アカウント設定の「請求」から直接解約できます。メールは不要です。プランはそこに表示される支払い期間の終了まで有効で、その後は更新されません。買い切りのクレジットパックはサブスクを開始しないため、解約するものはありません。


支払いは第三者決済サービスが処理し、カード情報はそのサービスが直接取得します。trellis-2.com はカード番号の完全な形を保存しません。当社が保持するのは、決済事業者、注文・サブスクの状態、金額、通貨、請求書番号、支払い日時といった取引記録のみです。価格はチェックアウト前に表示され、キャンセルしたチェックアウトが課金されることはありません。


TRELLIS.2で画像から3Dモデル生成を始めませんか?

TRELLIS.2を使用して、高品質な3Dモデル、PBRマテリアル、GLB形式エクスポートを簡単に実現できます。trellis-2の40億パラメータAIで今すぐ始めましょう。

ブログ

Best Free Online 3D Viewers in 2026: GLB, STL, OBJ, FBX

Oct 8, 2026

Best Free Online 3D Viewers in 2026: GLB, STL, OBJ, FBX

Six free ways to open a 3D file without installing much, compared on formats, upload, sign-in and limits, including the TRELLIS.2 browser viewer online.

How to Check a 3D Mesh Before Printing

Oct 4, 2026

How to Check a 3D Mesh Before Printing

Check a generated mesh in the browser before you convert it to STL and send it to a slicer. Catch holes, flipped normals and thin walls early on. Review the

Convert a GLB Draft to STL in the Browser

Oct 4, 2026

Convert a GLB Draft to STL in the Browser

Convert a GLB draft to STL in the browser, see which data you keep, and check the triangles before a slicer so thin walls do not surprise you later. Review the

How to Open a 3MF File in the Browser

Oct 4, 2026

How to Open a 3MF File in the Browser

Open a 3MF package in the browser, orbit the mesh, and check what the file does and does not carry before a separate print step or slicer import run. Review

How to Open an FBX File in the Browser

Oct 4, 2026

How to Open an FBX File in the Browser

Drop an FBX file in the browser, orbit the mesh, and see which scene data the preview does and does not show before you convert or edit it elsewhere. Review

How to Open a GLB File in the Browser

Oct 4, 2026

How to Open a GLB File in the Browser

Open a GLB file online, including the textured draft this site downloads from one image, and check the estimated sides before you convert or print it.

How to Open a glTF File in the Browser

Oct 4, 2026

How to Open a glTF File in the Browser

Open a glTF file in the browser, and see why a lone JSON file fails when the buffer or textures were left behind so you can fix the package first. Review the

How to Open an OBJ File in the Browser

Oct 4, 2026

How to Open an OBJ File in the Browser

Open an OBJ file in the browser, see the mesh without its sidecar materials, and know when to convert from a GLB so textures stay with the draft file.

How to Open a PLY File in the Browser

Oct 4, 2026

How to Open a PLY File in the Browser

Open a PLY mesh or scan in the browser, including vertex color, and see what a points-only file will not show before you convert or rebuild topology. Review

How to Open an STL File in the Browser

Oct 4, 2026

How to Open an STL File in the Browser

View an STL file online, orbit the triangles, and see why the preview has no color and no print profile before you send the mesh into a slicer tool. Review the

How to Turn a Photo into a 3D Model

Oct 4, 2026

How to Turn a Photo into a 3D Model

Turn one photo into a downloadable GLB draft, then inspect the estimated sides before you convert or print so thin walls and holes show up early on. Review the

Open-Source 3D AI in 2026: A Verification-First Guide

Jan 27, 2026

Open-Source 3D AI in 2026: A Verification-First Guide

Compare hosted trials and open-source image-to-3D models without invented rankings, then check current TRELLIS.2 facts and a cost-per-accepted-asset test.

ComfyUI and TRELLIS.2: A Safe Local Setup Checklist (2026)

Jan 27, 2026

ComfyUI and TRELLIS.2: A Safe Local Setup Checklist (2026)

Official TRELLIS.2 requirements, ComfyUI wrapper limits, install safety, model checks, workflow layout and troubleshooting for local image-to-3D. Review the

Open-Source Image-to-3D: TRELLIS.2 vs Hunyuan3D, TripoSR

Jan 27, 2026

Open-Source Image-to-3D: TRELLIS.2 vs Hunyuan3D, TripoSR

Source-based review of open-weight image-to-3D releases you can run yourself: TRELLIS.2, Hunyuan3D 2.1, TripoSR and Stable Fast 3D, licences included.

TRELLIS.2 to Blender: Import GLB, Inspect, Clean, and Export

Jan 27, 2026

TRELLIS.2 to Blender: Import GLB, Inspect, Clean, and Export

A practical TRELLIS.2-to-Blender workflow for importing the hosted GLB, checking transforms, geometry and PBR materials, then exporting the scene. Review the

TRELLIS.2 Tutorial: From One Image to a Reviewed GLB

Jan 27, 2026

TRELLIS.2 Tutorial: From One Image to a Reviewed GLB

Step-by-step TRELLIS.2 guide: input selection, 512/1024/1536 credit cost, tracked generation, GLB inspection, failure refunds and destination checks. Review

Can TRELLIS.2 Models Be 3D Printed? Mesh Validation

Jan 27, 2026

Can TRELLIS.2 Models Be 3D Printed? Mesh Validation

A practical TRELLIS.2 print-readiness workflow: manifoldness, holes, normals, wall thickness, scale, STL conversion, slicing and small test prints. Review the

TRELLIS.2 in a VFX Pipeline: An Evaluation Checklist

Jan 27, 2026

TRELLIS.2 in a VFX Pipeline: An Evaluation Checklist

A transparent workflow for evaluating TRELLIS.2 output for VFX, previs, set dressing, and production handoff, without any fabricated artist testimonials.

Trellis 2 Quickstart: Your First Image-to-3D Draft

Jan 27, 2026

Trellis 2 Quickstart: Your First Image-to-3D Draft

A truthful five-minute TRELLIS.2 quickstart: sign in, buy credits, start a 512 job, follow live job status, inspect the result, and download a GLB draft.

TRELLIS.2 (trellis-2) Guide: Image-to-3D, PBR, GLB

Dec 18, 2025

TRELLIS.2 (trellis-2) Guide: Image-to-3D, PBR, GLB

A practical trellis-2 / trellis 2 / trellis.2 guide: what TRELLIS.2 is, how image-to-3D works, best inputs, key settings, and how to export/import GLB assets.

← Swipe →