一次性积分包 $14.90 起

Batch reconstruction

Batch image to 3D: many reference images in, one delivery out

Bulk 3D work fails on logistics before it fails on quality: somebody still has to upload 200 images one at a time, name 200 files, and fix 200 polygon counts afterwards. We take the reference set once and hand back a finished batch — GLB, FBX or OBJ, cleaned and decimated to the budget you set — with a written scope and a delivery date.

What a batch run is, and what it is not

A self-serve batch button and a quoted batch both promise “many assets”, then diverge on who owns the work after generation.

Self-serve batch button

You drive the queue: one upload, one job, one download per asset. It works when every reference is clean and nobody has to fix the output afterwards.

Quoted batch, as run here

You hand over the reference set once. Generation, cleanup, decimation to an agreed triangle budget and delivery happen as one job with a named date.

Where the difference shows up

Mixed formats, rigged-app scale, a triangle budget per asset, and references that need a second angle. A batch queue answers none of that; a written scope does.

Why per-asset uploads stop scaling

One upload per asset
A 200-asset set entered through a per-asset tool is 200 uploads and 200 downloads. A quoted batch is one reference folder in and one delivery folder out.
One polygon budget per batch
Triangle targets are applied during cleanup, per asset, so you are not decimating 200 files by hand after the fact.
One revision list
Fixes come back as a single consolidated list per round rather than a thread per file, which is what keeps a 500-asset run reviewable.

How a reconstruction batch runs

  1. 1. Reference set in

    Send one to four images per asset, or a folder with a brief. Props usually survive a single clear photo; characters and architecture need more angles, because one photo does not describe the underside.

  2. 2. Scope agreed in writing

    Count, formats, triangle budget, texture size, revision rounds, delivery date and price go into one written scope before any work starts.

  3. 3. Reconstruct and clean

    Every reference goes through the image-to-3D pass, then manual cleanup: scale, orientation, smoothing, seam fixes and decimation to the agreed budget.

  4. 4. One delivery, one review

    Files arrive as a download folder with a manifest listing asset ID, format and triangle count. You send one revision list; delivery closes when it is applied.

Delivery specification

The same settings apply to every batch; the bulk 3D asset delivery page lists them in full, and the pricing page explains which of them move the price.

File formats
GLB by default. FBX and OBJ (with MTL) on request, including mixed formats inside one batch.
Polygon budget
Target triangle budgets of 10k, 25k, 50k or the native mesh from the image-to-3D pass. The budget is written into the scope, not decided after delivery.
Texture resolution
1024px on the starter batch, up to 2048px on larger batches. PBR maps: base colour, roughness, metallic, normal.
Revision rounds
Revisions are per batch, not per asset: one list of fixes per round, applied to the whole delivery. Extra rounds are quoted.

Start with the reference set

The quote form asks for asset count, target format, polygon budget, how many references you already have and your deadline. We reply within one business day, and nothing is charged until the scope is confirmed in writing.

Open the quote form

Batch image to 3D questions

How a batch differs from a self-serve queue, how many assets fit in one run, and what happens to a reference set that is not ready.

It means one order covering many assets: you send a reference set, and 50, 200 or 500+ finished 3D assets come back in one delivery with a written scope and a date. It is not a per-asset tool session you drive yourself.


Self-serve tools do offer batch runs, and they are the right answer when every reference is clean and the exports need no cleanup. They stop being cheaper once the batch needs a triangle budget per asset, mixed formats, or fixes applied after generation.


Those are self-serve generators: you drive the queue and fix the output. Here the batch is quoted in writing and delivered with cleanup, decimation and a manifest, so the deliverable is files that are ready to import, not raw generations.


The quoted tiers are 50 assets for $999 and 200 assets for $2,999. Runs of 500 or more are scoped per milestone, so a large set can be split into deliveries and stopped between them.


Yes, when the references and the delivery spec already exist. Send the current spec with the quote form and the reply quotes against it, including what would have to change to hit the same triangle budgets and formats.


We say so before the scope is signed, and list which assets need another angle. Quoting a batch against unusable references is what produces a revision round nobody can win.


Meshy Hermes Agent Plugin vs Trellis Mini $4.99 Inspect-First GLB

2026/10/31

Meshy Hermes Agent Plugin vs Trellis Mini $4.99 Inspect-First GLB

Meshy Agent/plugin subscription path vs Trellis Mini $4.99/150cr for one 512³ inspect-first GLB. Independent host, not Microsoft. Verified 2026-10-31.

Meshy First-Month ~50% Off vs Trellis Mini $4.99 GLB

2026/10/29

Meshy First-Month ~50% Off vs Trellis Mini $4.99 GLB

Meshy Pro shows ~$10 first month (~50% off). Trellis Mini is $4.99/150cr = one 512³ inspect-first GLB. Independent host, not Microsoft. Confirm checkout.

Print-Ready from Chat (Meshy Agent) vs Inspect-First $4.99 GLB

2026/10/27

Print-Ready from Chat (Meshy Agent) vs Inspect-First $4.99 GLB

Meshy Agent print-ready chat vs inspect-first Mini $4.99/150cr = one 512³ GLB on trellis-2.com. Independent host, not Microsoft. Checklist before slicer.

When You Don’t Need a 3D Agent: First Accepted GLB Checklist

2026/10/27

When You Don’t Need a 3D Agent: First Accepted GLB Checklist

Skip Meshy Agent chat when one photo → one inspectable GLB. Mini $4.99/150cr = one 512³ on trellis-2.com. Independent host, not Microsoft. Checklist first.

Hosted TRELLIS.2 vs Meshy Subscription: Cost Per Accepted GLB

2026/10/26

Hosted TRELLIS.2 vs Meshy Subscription: Cost Per Accepted GLB

One-time never-expire credits on trellis-2.com (150/300/500 per resolution) vs Meshy monthly pools. Compare cost per accepted GLB — independent host, not Microsoft.

📝

2026/10/08

2026 年免费在线 3D 查看器对比:GLB、STL、OBJ、FBX

六种几乎不用安装就能打开的 3D 文件方案,按格式、是否上传、是否要登录和限制对比,包含 TRELLIS.2 的浏览器查看器。

📝

2026/10/04

打印前怎么检查 3D 网格:在浏览器里先做一遍

在把生成的网格转成 STL、送进切片软件之前,先在浏览器里检查一遍:提前发现破洞、翻转的法线和过薄的壁。

📝

2026/10/04

在浏览器里把 GLB 草模转成 STL:会留下什么,会丢掉什么

在浏览器里把 GLB 草模转成 STL,弄清哪些数据留下、哪些数据丢掉,并在切片之前先确认三角面片,避免薄壁在打印时才暴露问题。

📝

2026/10/04

如何在线打开 3MF 文件:先看清包里到底是什么形状

在浏览器里打开 3MF 包,旋转网格,并分清这个文件带有什么、不带有什么,再决定要不要进一个单独的切片步骤。

📝

2026/10/04

如何在线打开 FBX 文件:形体能看,场景不保证

把 FBX 拖进浏览器,旋转查看网格,同时明确这个预览会显示哪些场景数据、不会显示哪些,再决定是否要在别处转换或编辑。

📝

2026/10/04

如何在线打开 GLB 文件:带材质的浏览器预览

在线打开 GLB 文件,包括本站从一张图生成的带纹理草模,并学会在转换或打印之前判断哪些面是模型估算出来的。

📝

2026/10/04

如何在线打开 glTF 文件:先确认 .bin 和贴图有没有一起到

在线打开 glTF 文件,并弄清楚为什么单独的 JSON 会打不开:缓冲区或贴图被落在别处时,先把交付包补全再预览。

📝

2026/10/04

如何在线打开 OBJ 文件:先看网格,再看材质

在浏览器里打开 OBJ 文件,看清楚的只有你拖进来的那个网格;同时知道什么时候该保留 GLB 的贴图、什么时候才需要转成 OBJ。

📝

2026/10/04

如何在线打开 PLY 文件:网格、扫描与点云的区别

在浏览器里打开 PLY 网格或扫描件,顺带看清顶点颜色能显示到什么程度,以及一个只有点、没有面的文件为什么画不成实体。

📝

2026/10/04

如何在线打开 STL 文件:在浏览器里查看三角网格

把 STL 拖进浏览器就能旋转查看三角面片,同时看清为什么预览是灰色、没有打印参数,以及切片前必须自己确认的尺寸和壁厚。

How to Turn a Photo into a 3D Model

2026/10/04

How to Turn a Photo into a 3D Model

Turn one photo into a downloadable GLB draft, then inspect the estimated sides before you convert or print so thin walls and holes show up early on.

Open-Source 3D AI in 2026: A Verification-First Guide

2026/01/27

Open-Source 3D AI in 2026: A Verification-First Guide

Compare hosted trials and open-source image-to-3D models without invented rankings, then check current TRELLIS.2 facts and a cost-per-accepted-asset test.

ComfyUI and TRELLIS.2: A Safe Local Setup Checklist (2026)

2026/01/27

ComfyUI and TRELLIS.2: A Safe Local Setup Checklist (2026)

Official TRELLIS.2 requirements, ComfyUI wrapper limits, install safety, model checks, workflow layout and troubleshooting for local image-to-3D.

Open-Source Image-to-3D: TRELLIS.2 vs Hunyuan3D, TripoSR

2026/01/27

Open-Source Image-to-3D: TRELLIS.2 vs Hunyuan3D, TripoSR

Source-based review of open-weight image-to-3D releases you can run yourself: TRELLIS.2, Hunyuan3D 2.1, TripoSR and Stable Fast 3D, licences included.

TRELLIS.2 to Blender: Import GLB, Inspect, Clean, and Export

2026/01/27

TRELLIS.2 to Blender: Import GLB, Inspect, Clean, and Export

A practical TRELLIS.2-to-Blender workflow for importing the hosted GLB, checking transforms, geometry and PBR materials, then exporting the scene.

TRELLIS.2 Tutorial: From One Image to a Reviewed GLB

2026/01/27

TRELLIS.2 Tutorial: From One Image to a Reviewed GLB

Step-by-step TRELLIS.2 guide: input selection, 512/1024/1536 credit cost, tracked generation, GLB inspection, failure refunds and destination checks.

Can TRELLIS.2 Models Be 3D Printed? Mesh Validation

2026/01/27

Can TRELLIS.2 Models Be 3D Printed? Mesh Validation

A practical TRELLIS.2 print-readiness workflow: manifoldness, holes, normals, wall thickness, scale, STL conversion, slicing and small test prints.

TRELLIS.2 in a VFX Pipeline: An Evaluation Checklist

2026/01/27

TRELLIS.2 in a VFX Pipeline: An Evaluation Checklist

A transparent workflow for evaluating TRELLIS.2 output for VFX, previs, set dressing, and production handoff, without any fabricated artist testimonials.

Trellis 2 Quickstart: Your First Image-to-3D Draft

2026/01/27

Trellis 2 Quickstart: Your First Image-to-3D Draft

A truthful five-minute TRELLIS.2 quickstart: sign in, buy credits, start a 512 job, follow live job status, inspect the result, and download a GLB draft.

📝

2025/12/18

TRELLIS.2(trellis-2)完整指南:图像转3D、PBR材质、GLB导出

一篇讲人话的 trellis-2 / trellis 2 / trellis.2 教程:TRELLIS.2 是什么、怎么把图片变3D、哪些图最适合、核心参数怎么选、以及GLB导出后怎么进Blender/Unity。

← Swipe →