一次性积分包 $14.90 起

Meshy First-Month ~50% Off vs Trellis Mini $4.99 GLB

2026/10/29
阅读约 9 分钟

试试 TRELLIS.2 AI 3D 生成器

把图片快速变成可下载的 3D 模型,适合产品图、游戏资产和原型验证。

立即生成 3D 模型

Short answer: Meshy’s public pricing shows Pro at $20 with a first-month ~50% off narrative (~$10 on the card this window), and FAQ copy that new users get 50% off their first month on any monthly plan (annual plans: 20% off). That pairs with Meshy’s 3D Agent story — chat → approve 2D concepts → export (including print paths) — where chat can be free and generation actions still spend credits. If your job is one photo → one inspectable accepted GLB before you trust a print or a DCC import, start with a priced draft, not a discounted suite month. On trellis-2.com the Mini pack is $4.99 / 150 credits = one 512³ job (1024³ / 1536³ = 300 / 500 credits). One-time credits never expire; failed jobs return reserved credits; GLB + PBR included. And be clear: trellis-2.com is an independent hosted TRELLIS.2 service — not Microsoft, not the official project site. Structure contrast only; don’t copy Agent sentences. Show the math; don’t dunk.

Deep-dives already LIVE: Meshy 3D Agent vs Trellis Mini · Cost Per Accepted GLB · Print-Ready Agent vs Inspect-First · When You Don’t Need a 3D Agent.


Two honest use cases

You are…Better fit
Want chat → concepts → suite features (animation, DCC bridge, Agent) and will use them monthlyMeshy Pro (watch first-month promo vs month 2+)
Trying Meshy’s Agent / print-ready path once under a promoMeshy first-month offer — still run your slicer
One photo, one draft GLB, inspect before printMini $4.99
First-ever hosted TRELLIS.2 taste testMini, then decide
Need one retry at 512³ or one step to 1024³Starter $12.90 / 300 cr

No dunking: a first-month discount is a real product shape for people evaluating a monthly 3D suite. An inspect-first forever slot is a real product shape for priced drafts you refuse until the mesh passes QA. Different jobs. Promo month ≠ unit cost of an accepted GLB.


First: what trellis-2.com is (and is not)

  • Independent third-party image-to-3D host with its own billing and support ([email protected]).
  • Not Microsoft, not affiliated with Microsoft, not the official TRELLIS.2 project site.
  • Microsoft publishes open-source TRELLIS.2 weights; this site sells managed generation, GLB + PBR download, and credit packs.

If you need official Microsoft product support, this is the wrong counter. If you need a browser path from one photo to a downloadable GLB with a printed credit cost — then a slicer test after inspection — this is the product under review.


Live numbers (2026-10-29 Asia/Shanghai)

trellis-2.com/pricing

OutputCredits reserved
512³150
1024³300
1536³500
PackPriceCreditsMax 512³
Mini$4.991501
Starter$12.903002 (or 1×1024³)
Pro$383,00020
Studio / Scale / …on-pagelarger poolson-page

One-time packs never expire. Failed jobs return reserved credits. GLB + PBR included on published packs.

Mini math: $4.99 = one accepted 512³ slot if the job succeeds and you keep the mesh after inspection. A successful-but-ugly result still spends credits — that is why the inspect-first checklist exists before you open a slicer or burn month-2 Meshy credits.

meshy.ai/pricing (first-month narrative)

Plan (public card this window)DisplayCredits
Free$0100 monthly credits
Pro$20 sticker · first-month ~$101,000 monthly credits (up to ~100 assets on-page narrative)
Premium / Ultra / Studiohigher cards on-pagelarger / shared pools — confirm live

FAQ on the same page: new users get 50% off their first month on any monthly plan, and 20% off on annual plans. Month 2+ returns to the regular sticker unless you cancel — treat first-month as a promo window, not the steady unit cost. Credits: monthly plan credits reset; permanent / purchased extras follow Meshy’s billing FAQ. Localization may change currency display — no FX invention.

Meshy 3D Agent (structure only — not copied sentences)

Public page shape:

  1. Describe idea / photo / sketch in chat.
  2. Approve 2D concepts, then convert to 3D.
  3. Export for pipeline — games, product viz, or print paths (STL / 3MF / OBJ into named slicers), including a marketed slicer pass-rate figure from Meshy’s internal test.

Treat that pass-rate as Meshy’s internal marketing metric, not your printer’s guarantee. Always run your slicer preview and a small test print. Agent chat may be free on Meshy’s Free plan; generation actions still spend credits — verify exact action costs in-app (not invented here).


First-month discount ≠ cost per accepted GLB

PathCash out todayWhat you hold after one useful draft
trellis Mini$4.99 onceUp to 1×512³ GLB+PBR; leftover N/A (spent or kept forever if unused)
Meshy Pro first month~$10 (50% off narrative)1,000 monthly credits + suite / Agent access; unused monthly credits typically reset
Meshy Pro month 2+$20 (public sticker)Same monthly pool shape

If you only needed one inspected GLB and would cancel after the promo month, Mini answers that without opening a subscription relationship. If you will actually use Agent chat, animation, DCC bridges, and dozens of assets this month, Pro’s first-month price can be the cheaper suite entry — spreadsheet your real asset count, not the sticker alone.

Do not invent Meshy credits-per-Agent-action or “how many accepted GLBs fit in 1,000 credits.” Those depend on model, retries, and in-app meters. Compare purchase shape: forever one-slot pack vs discounted-then-full monthly pool.


Inspect-first checklist (before you trust a print)

A) Input (before you spend 150 credits)

  • Single clear subject; readable silhouette.
  • Decent lighting on surfaces that will print or show in DCC.
  • No tiny-text / logo reliance — fine print rarely survives as geometry.
  • Expected back side — camera never saw it ⇒ don’t expect a perfect reverse.
  • Start at 512³ for the first draft; save 1024³ / 1536³ for after accept rate is known.

B) Mesh acceptance (before slicer)

  1. Silhouette — orbit; fused limbs, melted handles, floaters, holes in the back.
  2. Thin walls — paper-thin parts that will break or Z-fight.
  3. Manifold / normals — open in Blender or a repair tool; fix non-manifold edges before STL.
  4. Scale — measure a known real-world edge.
  5. UV / PBR sanity — only if textures matter for the print or game look.
  6. Export opens — GLB loads in site viewer and in your DCC.

C) Print / pipeline gate (after GLB accept)

  1. Convert / export STL or 3MF only after B passes.
  2. Slice in your slicer — watch overhangs, supports, wall thickness.
  3. One small resin or FDM test beats three blind regenerations.
  4. Only then spend another 150 / 300 / 500 on a retry or resolution step-up — or open a Meshy month if you decided you need the Agent suite.

Failures on trellis-2.com: Activity shows the reason; reserved credits return; retry is a new run. Do not treat “job succeeded” as “print-ready.”


FAQ

1. Does Meshy’s first-month ~50% off beat Mini $4.99?
For one inspectable 512³ GLB: Mini is a $4.99 dedicated line item with no month 2. For a full suite month (Agent, animation, multi-format, team features): Pro’s ~$10 first month can be the better suite entry — if you will use those features. Confirm the live Pro card and cancel path before you rely on the promo.

2. Are Agent action credits published as a fixed “per GLB” price?
Not as a single public line item on the feature page. Chat may be free; actions spend credits in-app. Do not invent Agent per-action numbers. Meshy’s 97% slicer pass claim is internal marketing, not an independent benchmark.

3. What does Mini actually buy?
$4.99 / 150 credits = 1×512³. 1024³ = 300 cr, 1536³ = 500 cr. GLB + PBR included. Credits never expire. Failed jobs return reserved credits.

4. Is trellis-2.com Microsoft TRELLIS.2?
No. Independent hosted TRELLIS.2 — not Microsoft, not the official project. Support: [email protected].

5. I already read the Agent vs Mini / print-ready posts — why this one?
Those cover Agent necessity and print-ready marketing. This card is specifically first-month ~50% off vs Mini forever slot — promo math vs inspect-first purchase shape.


CTA

For inspect-first, one 512³ draft: Mini $4.99 / 150 credits. Orbit the GLB. Run the checklist. Slice only after accept. For suite + Agent under a first-month promo, compare Meshy’s live Pro card on meshy.ai/pricing and the Agent page on meshy.ai/features/3d-agent with the same adult energy — no trash talk, and no substitute for your own slicer test.

Also see: Meshy 3D Agent vs Trellis Mini · Cost Per Accepted GLB · Print-Ready Agent vs Inspect-First · When You Don’t Need a 3D Agent.

Need billing help on our side? Email [email protected].


Sources (live, 2026-10-29 Asia/Shanghai)

UNVERIFIED / notes

  • Exact Meshy credits per Agent action / print-path step: in-app — not invented.
  • Meshy 97% slicer pass rate: Meshy internal test marketing — not your printer’s guarantee; not an independent benchmark.
  • Exact Meshy first-month eligibility (new user only, geo, annual toggle): confirm live checkout — promo can change.
  • Meshy pricing may localize currency — no FX invention.
  • Search volume / CTR: unavailable — not invented.
  • Independent host disclaimer: trellis-2.com is not Microsoft.
  • Live support mailbox this window: [email protected] (working MX). Do not treat that as the brand spelling of trellis-2.com — Charlie must add MX on trellis-2.com before any mass mailto flip.

TRELLIS.2 Editorial Team

Meshy Hermes Agent Plugin vs Trellis Mini $4.99 Inspect-First GLB

2026/10/31

Meshy Hermes Agent Plugin vs Trellis Mini $4.99 Inspect-First GLB

Meshy Agent/plugin subscription path vs Trellis Mini $4.99/150cr for one 512³ inspect-first GLB. Independent host, not Microsoft. Verified 2026-10-31.

Meshy First-Month ~50% Off vs Trellis Mini $4.99 GLB

2026/10/29

Meshy First-Month ~50% Off vs Trellis Mini $4.99 GLB

Meshy Pro shows ~$10 first month (~50% off). Trellis Mini is $4.99/150cr = one 512³ inspect-first GLB. Independent host, not Microsoft. Confirm checkout.

Print-Ready from Chat (Meshy Agent) vs Inspect-First $4.99 GLB

2026/10/27

Print-Ready from Chat (Meshy Agent) vs Inspect-First $4.99 GLB

Meshy Agent print-ready chat vs inspect-first Mini $4.99/150cr = one 512³ GLB on trellis-2.com. Independent host, not Microsoft. Checklist before slicer.

When You Don’t Need a 3D Agent: First Accepted GLB Checklist

2026/10/27

When You Don’t Need a 3D Agent: First Accepted GLB Checklist

Skip Meshy Agent chat when one photo → one inspectable GLB. Mini $4.99/150cr = one 512³ on trellis-2.com. Independent host, not Microsoft. Checklist first.

Hosted TRELLIS.2 vs Meshy Subscription: Cost Per Accepted GLB

2026/10/26

Hosted TRELLIS.2 vs Meshy Subscription: Cost Per Accepted GLB

One-time never-expire credits on trellis-2.com (150/300/500 per resolution) vs Meshy monthly pools. Compare cost per accepted GLB — independent host, not Microsoft.

📝

2026/10/08

2026 年免费在线 3D 查看器对比:GLB、STL、OBJ、FBX

六种几乎不用安装就能打开的 3D 文件方案,按格式、是否上传、是否要登录和限制对比,包含 TRELLIS.2 的浏览器查看器。

📝

2026/10/04

打印前怎么检查 3D 网格:在浏览器里先做一遍

在把生成的网格转成 STL、送进切片软件之前,先在浏览器里检查一遍:提前发现破洞、翻转的法线和过薄的壁。

📝

2026/10/04

在浏览器里把 GLB 草模转成 STL:会留下什么,会丢掉什么

在浏览器里把 GLB 草模转成 STL,弄清哪些数据留下、哪些数据丢掉,并在切片之前先确认三角面片,避免薄壁在打印时才暴露问题。

📝

2026/10/04

如何在线打开 3MF 文件:先看清包里到底是什么形状

在浏览器里打开 3MF 包,旋转网格,并分清这个文件带有什么、不带有什么,再决定要不要进一个单独的切片步骤。

📝

2026/10/04

如何在线打开 FBX 文件:形体能看,场景不保证

把 FBX 拖进浏览器,旋转查看网格,同时明确这个预览会显示哪些场景数据、不会显示哪些,再决定是否要在别处转换或编辑。

📝

2026/10/04

如何在线打开 GLB 文件:带材质的浏览器预览

在线打开 GLB 文件,包括本站从一张图生成的带纹理草模,并学会在转换或打印之前判断哪些面是模型估算出来的。

📝

2026/10/04

如何在线打开 glTF 文件:先确认 .bin 和贴图有没有一起到

在线打开 glTF 文件,并弄清楚为什么单独的 JSON 会打不开:缓冲区或贴图被落在别处时,先把交付包补全再预览。

📝

2026/10/04

如何在线打开 OBJ 文件:先看网格,再看材质

在浏览器里打开 OBJ 文件,看清楚的只有你拖进来的那个网格;同时知道什么时候该保留 GLB 的贴图、什么时候才需要转成 OBJ。

📝

2026/10/04

如何在线打开 PLY 文件:网格、扫描与点云的区别

在浏览器里打开 PLY 网格或扫描件,顺带看清顶点颜色能显示到什么程度,以及一个只有点、没有面的文件为什么画不成实体。

📝

2026/10/04

如何在线打开 STL 文件:在浏览器里查看三角网格

把 STL 拖进浏览器就能旋转查看三角面片,同时看清为什么预览是灰色、没有打印参数,以及切片前必须自己确认的尺寸和壁厚。

How to Turn a Photo into a 3D Model

2026/10/04

How to Turn a Photo into a 3D Model

Turn one photo into a downloadable GLB draft, then inspect the estimated sides before you convert or print so thin walls and holes show up early on.

Open-Source 3D AI in 2026: A Verification-First Guide

2026/01/27

Open-Source 3D AI in 2026: A Verification-First Guide

Compare hosted trials and open-source image-to-3D models without invented rankings, then check current TRELLIS.2 facts and a cost-per-accepted-asset test.

ComfyUI and TRELLIS.2: A Safe Local Setup Checklist (2026)

2026/01/27

ComfyUI and TRELLIS.2: A Safe Local Setup Checklist (2026)

Official TRELLIS.2 requirements, ComfyUI wrapper limits, install safety, model checks, workflow layout and troubleshooting for local image-to-3D.

Open-Source Image-to-3D: TRELLIS.2 vs Hunyuan3D, TripoSR

2026/01/27

Open-Source Image-to-3D: TRELLIS.2 vs Hunyuan3D, TripoSR

Source-based review of open-weight image-to-3D releases you can run yourself: TRELLIS.2, Hunyuan3D 2.1, TripoSR and Stable Fast 3D, licences included.

TRELLIS.2 to Blender: Import GLB, Inspect, Clean, and Export

2026/01/27

TRELLIS.2 to Blender: Import GLB, Inspect, Clean, and Export

A practical TRELLIS.2-to-Blender workflow for importing the hosted GLB, checking transforms, geometry and PBR materials, then exporting the scene.

TRELLIS.2 Tutorial: From One Image to a Reviewed GLB

2026/01/27

TRELLIS.2 Tutorial: From One Image to a Reviewed GLB

Step-by-step TRELLIS.2 guide: input selection, 512/1024/1536 credit cost, tracked generation, GLB inspection, failure refunds and destination checks.

Can TRELLIS.2 Models Be 3D Printed? Mesh Validation

2026/01/27

Can TRELLIS.2 Models Be 3D Printed? Mesh Validation

A practical TRELLIS.2 print-readiness workflow: manifoldness, holes, normals, wall thickness, scale, STL conversion, slicing and small test prints.

TRELLIS.2 in a VFX Pipeline: An Evaluation Checklist

2026/01/27

TRELLIS.2 in a VFX Pipeline: An Evaluation Checklist

A transparent workflow for evaluating TRELLIS.2 output for VFX, previs, set dressing, and production handoff, without any fabricated artist testimonials.

Trellis 2 Quickstart: Your First Image-to-3D Draft

2026/01/27

Trellis 2 Quickstart: Your First Image-to-3D Draft

A truthful five-minute TRELLIS.2 quickstart: sign in, buy credits, start a 512 job, follow live job status, inspect the result, and download a GLB draft.

📝

2025/12/18

TRELLIS.2(trellis-2)完整指南:图像转3D、PBR材质、GLB导出

一篇讲人话的 trellis-2 / trellis 2 / trellis.2 教程:TRELLIS.2 是什么、怎么把图片变3D、哪些图最适合、核心参数怎么选、以及GLB导出后怎么进Blender/Unity。

← Swipe →
Meshy First-Month ~50% Off vs Trellis Mini $4.99 GLB