一次性积分包 $14.90 起

Trellis 2 Quickstart: Your First Image-to-3D Draft

2026/01/27
阅读约 4 分钟

试试 TRELLIS.2 AI 3D 生成器

把图片快速变成可下载的 3D 模型,适合产品图、游戏资产和原型验证。

立即生成 3D 模型

What “Five Minutes” Means

With a prepared image and normal provider load, you can often sign in, submit a 512 job, wait roughly one to three minutes, inspect the result, and start a GLB download in about five minutes. This is a practical target, not a service-level guarantee. Queue load, input complexity, and selected settings can make a job slower.

trellis-2.com is an independent web service built around TRELLIS.2 technology. It is not the official Microsoft project site and is not endorsed by Microsoft. The upstream project is available in the Microsoft TRELLIS.2 repository.

Step 1: Choose One Clear Image

The input has more influence on the first result than a long list of advanced settings. Start with:

  • One object, centered and fully visible
  • A plain or transparent background
  • Even lighting and a distinct silhouette
  • A square image at 512 × 512 pixels or larger
  • An object without glass, heavy reflections, motion blur, or severe occlusion

The model cannot see the back or underside of the object. It estimates hidden geometry, so check every angle after generation.

Step 2: Sign In

Open the image-to-3D generator and sign in. An account is required because generation uses credits, creates a tracked provider task, and attaches the result to the correct user.

A task draws on credits from a purchase, an active subscription or its renewal grant, or the one-time trial grant for a first 512³ job (up to 150 credits, valid for 7 days). Signup rewards and daily claims are switched off, so a new account needs the trial grant or a purchase before a provider job can start.

Step 3: Start at 512

Choose 512 for the first evaluation. It answers the most important question at the lowest cost: does TRELLIS.2 infer a useful shape and texture from this image?

The generator also exposes higher settings, but 1024 and 1536 require more credits. Higher resolution can add detail; it cannot reconstruct information that is missing from the photograph.

Before submitting, confirm:

  1. The mode is image-to-3D.
  2. The correct image preview is visible.
  3. The displayed resolution is 512.
  4. The shown credit cost matches the available balance.

Step 4: Follow the Live Task

After submission, the job moves through pending and processing states. The page polls the server rather than pretending the model is finished after a fixed timer. You can leave and return while a long-running provider task continues.

The account is limited to two recent active 3D jobs. This protects the credit balance and prevents repeated clicks from creating a pile of paid provider work. Credits are reserved before the provider call. If the tracked submission or task fails, the consumption record is claimed once and the reserved credits are returned with a refund audit attached to the task.

Step 5: Inspect and Download

When the provider reports success, rotate and zoom the result before downloading. Look for:

  • Hidden-side geometry that does not match the intended object
  • Thin pieces that have merged or disappeared
  • Texture seams, baked shadows, or reflections
  • Scale, orientation, and polygon density issues

The direct web-generator download is a GLB file. GLB carries mesh and material data in one portable asset. You can inspect it in the browser GLB viewer, import it into Blender with File → Import → glTF 2.0, or convert it with the 3D format converter.

The download action is recorded only as a task-level timestamp and count for product follow-up; it does not publish the asset or its private account details.

What the Result Is—and Is Not

The generated GLB is a draft. It may work immediately for a concept preview, but game, VFX, commerce, AR, and print uses commonly require retopology, UV checks, material cleanup, LODs, scale validation, or mesh repair.

Do not use a single-image generation as dimensional evidence for a functional replacement part. Measure and rebuild engineering-critical geometry in CAD.

After the Trial

If the 512 result is useful, compare the current one-time and subscription options. Pricing copy lists only implemented entitlements, and the generator shows the credit cost of the selected resolution before another job.

If the result is not useful, try one better-isolated image before buying more credits. If the same geometry problem repeats, send the input conditions and task time—not private payment data—to support so the failure can be reproduced.

Sources and Updates

This workflow was checked against the generator, credit, concurrency, failure-refund, and download behavior on 2026-07-19. Technical attribution links to the upstream Microsoft repository. See the editorial policy for correction and review rules.

Start the 512 Image-to-3D Trial

TRELLIS.2 Editorial Team

Meshy Hermes Agent Plugin vs Trellis Mini $4.99 Inspect-First GLB

2026/10/31

Meshy Hermes Agent Plugin vs Trellis Mini $4.99 Inspect-First GLB

Meshy Agent/plugin subscription path vs Trellis Mini $4.99/150cr for one 512³ inspect-first GLB. Independent host, not Microsoft. Verified 2026-10-31.

Meshy First-Month ~50% Off vs Trellis Mini $4.99 GLB

2026/10/29

Meshy First-Month ~50% Off vs Trellis Mini $4.99 GLB

Meshy Pro shows ~$10 first month (~50% off). Trellis Mini is $4.99/150cr = one 512³ inspect-first GLB. Independent host, not Microsoft. Confirm checkout.

Print-Ready from Chat (Meshy Agent) vs Inspect-First $4.99 GLB

2026/10/27

Print-Ready from Chat (Meshy Agent) vs Inspect-First $4.99 GLB

Meshy Agent print-ready chat vs inspect-first Mini $4.99/150cr = one 512³ GLB on trellis-2.com. Independent host, not Microsoft. Checklist before slicer.

When You Don’t Need a 3D Agent: First Accepted GLB Checklist

2026/10/27

When You Don’t Need a 3D Agent: First Accepted GLB Checklist

Skip Meshy Agent chat when one photo → one inspectable GLB. Mini $4.99/150cr = one 512³ on trellis-2.com. Independent host, not Microsoft. Checklist first.

Hosted TRELLIS.2 vs Meshy Subscription: Cost Per Accepted GLB

2026/10/26

Hosted TRELLIS.2 vs Meshy Subscription: Cost Per Accepted GLB

One-time never-expire credits on trellis-2.com (150/300/500 per resolution) vs Meshy monthly pools. Compare cost per accepted GLB — independent host, not Microsoft.

📝

2026/10/08

2026 年免费在线 3D 查看器对比:GLB、STL、OBJ、FBX

六种几乎不用安装就能打开的 3D 文件方案,按格式、是否上传、是否要登录和限制对比,包含 TRELLIS.2 的浏览器查看器。

📝

2026/10/04

打印前怎么检查 3D 网格:在浏览器里先做一遍

在把生成的网格转成 STL、送进切片软件之前,先在浏览器里检查一遍:提前发现破洞、翻转的法线和过薄的壁。

📝

2026/10/04

在浏览器里把 GLB 草模转成 STL:会留下什么,会丢掉什么

在浏览器里把 GLB 草模转成 STL,弄清哪些数据留下、哪些数据丢掉,并在切片之前先确认三角面片,避免薄壁在打印时才暴露问题。

📝

2026/10/04

如何在线打开 3MF 文件:先看清包里到底是什么形状

在浏览器里打开 3MF 包,旋转网格,并分清这个文件带有什么、不带有什么,再决定要不要进一个单独的切片步骤。

📝

2026/10/04

如何在线打开 FBX 文件:形体能看,场景不保证

把 FBX 拖进浏览器,旋转查看网格,同时明确这个预览会显示哪些场景数据、不会显示哪些,再决定是否要在别处转换或编辑。

📝

2026/10/04

如何在线打开 GLB 文件:带材质的浏览器预览

在线打开 GLB 文件,包括本站从一张图生成的带纹理草模,并学会在转换或打印之前判断哪些面是模型估算出来的。

📝

2026/10/04

如何在线打开 glTF 文件:先确认 .bin 和贴图有没有一起到

在线打开 glTF 文件,并弄清楚为什么单独的 JSON 会打不开:缓冲区或贴图被落在别处时,先把交付包补全再预览。

📝

2026/10/04

如何在线打开 OBJ 文件:先看网格,再看材质

在浏览器里打开 OBJ 文件,看清楚的只有你拖进来的那个网格;同时知道什么时候该保留 GLB 的贴图、什么时候才需要转成 OBJ。

📝

2026/10/04

如何在线打开 PLY 文件:网格、扫描与点云的区别

在浏览器里打开 PLY 网格或扫描件,顺带看清顶点颜色能显示到什么程度,以及一个只有点、没有面的文件为什么画不成实体。

📝

2026/10/04

如何在线打开 STL 文件:在浏览器里查看三角网格

把 STL 拖进浏览器就能旋转查看三角面片,同时看清为什么预览是灰色、没有打印参数,以及切片前必须自己确认的尺寸和壁厚。

How to Turn a Photo into a 3D Model

2026/10/04

How to Turn a Photo into a 3D Model

Turn one photo into a downloadable GLB draft, then inspect the estimated sides before you convert or print so thin walls and holes show up early on.

Open-Source 3D AI in 2026: A Verification-First Guide

2026/01/27

Open-Source 3D AI in 2026: A Verification-First Guide

Compare hosted trials and open-source image-to-3D models without invented rankings, then check current TRELLIS.2 facts and a cost-per-accepted-asset test.

ComfyUI and TRELLIS.2: A Safe Local Setup Checklist (2026)

2026/01/27

ComfyUI and TRELLIS.2: A Safe Local Setup Checklist (2026)

Official TRELLIS.2 requirements, ComfyUI wrapper limits, install safety, model checks, workflow layout and troubleshooting for local image-to-3D.

Open-Source Image-to-3D: TRELLIS.2 vs Hunyuan3D, TripoSR

2026/01/27

Open-Source Image-to-3D: TRELLIS.2 vs Hunyuan3D, TripoSR

Source-based review of open-weight image-to-3D releases you can run yourself: TRELLIS.2, Hunyuan3D 2.1, TripoSR and Stable Fast 3D, licences included.

TRELLIS.2 to Blender: Import GLB, Inspect, Clean, and Export

2026/01/27

TRELLIS.2 to Blender: Import GLB, Inspect, Clean, and Export

A practical TRELLIS.2-to-Blender workflow for importing the hosted GLB, checking transforms, geometry and PBR materials, then exporting the scene.

TRELLIS.2 Tutorial: From One Image to a Reviewed GLB

2026/01/27

TRELLIS.2 Tutorial: From One Image to a Reviewed GLB

Step-by-step TRELLIS.2 guide: input selection, 512/1024/1536 credit cost, tracked generation, GLB inspection, failure refunds and destination checks.

Can TRELLIS.2 Models Be 3D Printed? Mesh Validation

2026/01/27

Can TRELLIS.2 Models Be 3D Printed? Mesh Validation

A practical TRELLIS.2 print-readiness workflow: manifoldness, holes, normals, wall thickness, scale, STL conversion, slicing and small test prints.

TRELLIS.2 in a VFX Pipeline: An Evaluation Checklist

2026/01/27

TRELLIS.2 in a VFX Pipeline: An Evaluation Checklist

A transparent workflow for evaluating TRELLIS.2 output for VFX, previs, set dressing, and production handoff, without any fabricated artist testimonials.

Trellis 2 Quickstart: Your First Image-to-3D Draft

2026/01/27

Trellis 2 Quickstart: Your First Image-to-3D Draft

A truthful five-minute TRELLIS.2 quickstart: sign in, buy credits, start a 512 job, follow live job status, inspect the result, and download a GLB draft.

📝

2025/12/18

TRELLIS.2(trellis-2)完整指南:图像转3D、PBR材质、GLB导出

一篇讲人话的 trellis-2 / trellis 2 / trellis.2 教程:TRELLIS.2 是什么、怎么把图片变3D、哪些图最适合、核心参数怎么选、以及GLB导出后怎么进Blender/Unity。

← Swipe →
Trellis 2 Quickstart: Your First Image-to-3D Draft