一次性积分包 $14.90 起

Hosted TRELLIS.2 vs Meshy Subscription: Cost Per Accepted GLB

2026/10/26
阅读约 7 分钟

试试 TRELLIS.2 AI 3D 生成器

把图片快速变成可下载的 3D 模型,适合产品图、游戏资产和原型验证。

立即生成 3D 模型

Short answer: On trellis-2.com you buy one-time credits that never expire and pay a published rate per resolution (150 / 300 / 500 credits for 512³ / 1024³ / 1536³). The Mini pack is $4.99 for 150 credits — enough for one 512³ GLB. Meshy sells monthly credit pools (Pro publicly listed at $20/month for 1,000 monthly credits, often shown with a first-month promo). Compare cost per accepted GLB, not logo size. And be clear: trellis-2.com is an independent hosted service, not Microsoft, even though it runs a hosted workflow around the open-source TRELLIS.2 model.


First: what trellis-2.com is (and is not)

Homepage and FAQ state it plainly:

  • Independent third-party image-to-3D host with its own billing and support.
  • Not Microsoft, not affiliated with Microsoft, not the official project site.
  • Microsoft publishes the open-source TRELLIS.2 weights; this site sells managed generation, GLB + PBR download, and credit packs.

If you need “official Microsoft product support,” this is the wrong counter. If you need a browser path from one photo to a downloadable GLB draft with a printed credit cost, this is the product under review.


Public price math (TRELLIS.2 hosted)

Per-job credits (live FAQ / generator)

OutputCredits reservedNotes
512³150Default / Mini-sized job
1024³3002× the 512³ credit cost
1536³500Highest self-serve resolution on the pricing FAQ

GLB export and PBR textures are included on the published packs. Failed jobs return reserved credits automatically.

One-time packs (live pricing, never expire)

PackPriceCreditsMax 512³Max 1024³Max 1536³
Mini$4.99150100
Starter$12.90300210
Pro$383,00020106
Studio$12922,5001507545

Cost per successful 512³ slot (if you accept every output):

Pack$ / accepted 512³ (pack ÷ max count)
Mini$4.99
Starter$6.45
Pro~$1.90
Studio$0.86

Rejected taste-tests that still succeed still spend credits. Failed provider runs do not — credits come back. So “accepted GLB” means: job succeeded and you kept the mesh after inspection.

Refund window on unused purchases: requests within 3 days, unused credits only (live FAQ; processing fees may apply on approved refunds).


Public price math (Meshy subscription)

From meshy.ai/pricing on 2026-10-26 (UI shows promo strikethroughs; list figures below):

Plan (public cards)List monthlyCredits called outMarketing capacity note
Free$0100 / monthlimited; CC BY 4.0 on free
Pro$20 (promo often $10 first month)1,000 monthly credits“up to 100 assets”
Higher tiersPremium / Ultra / Studio cards3,000+ / shared poolsteam features, faster queues

Important differences vs trellis-2.com Mini:

  1. Monthly credits reset — unused Meshy plan credits do not behave like trellis one-time forever packs.
  2. Exact credits per Image-to-3D job are not a single public constant on the pricing hero (the “up to 100 assets” line implies ~10 credits/asset on average for that marketing math). Treat per-job Meshy spend as verify-in-app.
  3. Meshy’s public refund FAQ generally does not promise refunds (case-by-case via support). trellis-2.com publishes automatic failure credit returns plus a short unused-pack window.

Side-by-side for “I need one accepted GLB this week”

PathCash out todayWhat you hold if the first mesh passes inspection
trellis-2 Mini$4.99 once1× 512³ GLB attempt; leftover 0 cr; no subscription
trellis-2 Starter$12.90 onceroom for a second 512³ or one 1024³
Meshy Pro$20/mo list ($10 promo if still offered)up to ~100 assets / month inside Meshy’s credit rules, then monthly renew / reset

If you only need one product or character draft, Mini’s $4.99 per accepted 512³ is the clean unit price. If you will accept dozens of meshes every month inside Meshy’s broader toolbox (text-to-3D, animation, DCC bridges), a subscription pool can win on volume — but that is a different job than “one photo → one reviewed GLB.”


Inspect checklist before you call a GLB “accepted”

Do this on every trellis-2.com download (and any Meshy export you plan to ship):

  1. Input — single subject, clear silhouette, decent lighting; busy scenes raise failure and cleanup cost.
  2. Orbit the GLB — thin walls, fused fingers, holes in the back of the head, floaters.
  3. Normals / non-manifold — open in Blender or the site’s free viewers before print or engine import.
  4. PBR sanity — base color vs roughness/metal; alpha only if you expected glass/transparency.
  5. Scale — measure a known real-world edge before STL / game export.
  6. Destination test — one engine import or one small resin test print beats three blind regenerations.
  7. Only then upgrade resolution (1024³ / 1536³) or buy a larger pack.

Failures: Activity shows the reason; reserved 150 / 300 / 500 credits return in full; retry is a new run with no mandatory wait (live FAQ).


When to stay on Mini vs jump to Pro

SituationPack
First-ever hosted TRELLIS.2 draftMini $4.99
One retry at 512³ or one step up to 1024³Starter $12.90
Batch of product SKUs, ~20 accepted 512³Pro $38 (~$1.90 each if all accepted)
Ongoing multi-tool 3D suite with team seatsEvaluate Meshy (or others) on their monthly math — different product shape

CTA

Start with Mini ($4.99 / 150 credits / one 512³) on trellis-2.com/pricing. Generate one clean single-object photo on trellis-2.com, download the GLB, and run the inspect checklist above. Buy Starter or Pro only after you know your accept rate. Remember: independent site, not Microsoft — you are paying for hosted queue, billing, and support around the model, not for a Microsoft license.


Sources (live, 2026-10-26 Asia/Shanghai)

UNVERIFIED / notes

  • Meshy exact credits per Image-to-3D submission by model version: UNVERIFIED on the public pricing hero (use in-app quote). “Up to 100 assets” is Meshy marketing capacity, not a measured accept rate.
  • Whether a given visitor still sees the $10 Pro promo: promo-dependent — list price $20 verified on page.
  • Search volume / CTR: unavailable.
  • Support email on the homepage footer and Contact / Refund pages is [email protected] (brand domain). Mail delivery still depends on MX for that host.

TRELLIS.2 Editorial Team

Meshy Hermes Agent Plugin vs Trellis Mini $4.99 Inspect-First GLB

2026/10/31

Meshy Hermes Agent Plugin vs Trellis Mini $4.99 Inspect-First GLB

Meshy Agent/plugin subscription path vs Trellis Mini $4.99/150cr for one 512³ inspect-first GLB. Independent host, not Microsoft. Verified 2026-10-31.

Meshy First-Month ~50% Off vs Trellis Mini $4.99 GLB

2026/10/29

Meshy First-Month ~50% Off vs Trellis Mini $4.99 GLB

Meshy Pro shows ~$10 first month (~50% off). Trellis Mini is $4.99/150cr = one 512³ inspect-first GLB. Independent host, not Microsoft. Confirm checkout.

Print-Ready from Chat (Meshy Agent) vs Inspect-First $4.99 GLB

2026/10/27

Print-Ready from Chat (Meshy Agent) vs Inspect-First $4.99 GLB

Meshy Agent print-ready chat vs inspect-first Mini $4.99/150cr = one 512³ GLB on trellis-2.com. Independent host, not Microsoft. Checklist before slicer.

When You Don’t Need a 3D Agent: First Accepted GLB Checklist

2026/10/27

When You Don’t Need a 3D Agent: First Accepted GLB Checklist

Skip Meshy Agent chat when one photo → one inspectable GLB. Mini $4.99/150cr = one 512³ on trellis-2.com. Independent host, not Microsoft. Checklist first.

Hosted TRELLIS.2 vs Meshy Subscription: Cost Per Accepted GLB

2026/10/26

Hosted TRELLIS.2 vs Meshy Subscription: Cost Per Accepted GLB

One-time never-expire credits on trellis-2.com (150/300/500 per resolution) vs Meshy monthly pools. Compare cost per accepted GLB — independent host, not Microsoft.

📝

2026/10/08

2026 年免费在线 3D 查看器对比:GLB、STL、OBJ、FBX

六种几乎不用安装就能打开的 3D 文件方案,按格式、是否上传、是否要登录和限制对比,包含 TRELLIS.2 的浏览器查看器。

📝

2026/10/04

打印前怎么检查 3D 网格:在浏览器里先做一遍

在把生成的网格转成 STL、送进切片软件之前,先在浏览器里检查一遍:提前发现破洞、翻转的法线和过薄的壁。

📝

2026/10/04

在浏览器里把 GLB 草模转成 STL:会留下什么,会丢掉什么

在浏览器里把 GLB 草模转成 STL,弄清哪些数据留下、哪些数据丢掉,并在切片之前先确认三角面片,避免薄壁在打印时才暴露问题。

📝

2026/10/04

如何在线打开 3MF 文件:先看清包里到底是什么形状

在浏览器里打开 3MF 包,旋转网格,并分清这个文件带有什么、不带有什么,再决定要不要进一个单独的切片步骤。

📝

2026/10/04

如何在线打开 FBX 文件:形体能看,场景不保证

把 FBX 拖进浏览器,旋转查看网格,同时明确这个预览会显示哪些场景数据、不会显示哪些,再决定是否要在别处转换或编辑。

📝

2026/10/04

如何在线打开 GLB 文件:带材质的浏览器预览

在线打开 GLB 文件,包括本站从一张图生成的带纹理草模,并学会在转换或打印之前判断哪些面是模型估算出来的。

📝

2026/10/04

如何在线打开 glTF 文件:先确认 .bin 和贴图有没有一起到

在线打开 glTF 文件,并弄清楚为什么单独的 JSON 会打不开:缓冲区或贴图被落在别处时,先把交付包补全再预览。

📝

2026/10/04

如何在线打开 OBJ 文件:先看网格,再看材质

在浏览器里打开 OBJ 文件,看清楚的只有你拖进来的那个网格;同时知道什么时候该保留 GLB 的贴图、什么时候才需要转成 OBJ。

📝

2026/10/04

如何在线打开 PLY 文件:网格、扫描与点云的区别

在浏览器里打开 PLY 网格或扫描件,顺带看清顶点颜色能显示到什么程度,以及一个只有点、没有面的文件为什么画不成实体。

📝

2026/10/04

如何在线打开 STL 文件:在浏览器里查看三角网格

把 STL 拖进浏览器就能旋转查看三角面片,同时看清为什么预览是灰色、没有打印参数,以及切片前必须自己确认的尺寸和壁厚。

How to Turn a Photo into a 3D Model

2026/10/04

How to Turn a Photo into a 3D Model

Turn one photo into a downloadable GLB draft, then inspect the estimated sides before you convert or print so thin walls and holes show up early on.

Open-Source 3D AI in 2026: A Verification-First Guide

2026/01/27

Open-Source 3D AI in 2026: A Verification-First Guide

Compare hosted trials and open-source image-to-3D models without invented rankings, then check current TRELLIS.2 facts and a cost-per-accepted-asset test.

ComfyUI and TRELLIS.2: A Safe Local Setup Checklist (2026)

2026/01/27

ComfyUI and TRELLIS.2: A Safe Local Setup Checklist (2026)

Official TRELLIS.2 requirements, ComfyUI wrapper limits, install safety, model checks, workflow layout and troubleshooting for local image-to-3D.

Open-Source Image-to-3D: TRELLIS.2 vs Hunyuan3D, TripoSR

2026/01/27

Open-Source Image-to-3D: TRELLIS.2 vs Hunyuan3D, TripoSR

Source-based review of open-weight image-to-3D releases you can run yourself: TRELLIS.2, Hunyuan3D 2.1, TripoSR and Stable Fast 3D, licences included.

TRELLIS.2 to Blender: Import GLB, Inspect, Clean, and Export

2026/01/27

TRELLIS.2 to Blender: Import GLB, Inspect, Clean, and Export

A practical TRELLIS.2-to-Blender workflow for importing the hosted GLB, checking transforms, geometry and PBR materials, then exporting the scene.

TRELLIS.2 Tutorial: From One Image to a Reviewed GLB

2026/01/27

TRELLIS.2 Tutorial: From One Image to a Reviewed GLB

Step-by-step TRELLIS.2 guide: input selection, 512/1024/1536 credit cost, tracked generation, GLB inspection, failure refunds and destination checks.

Can TRELLIS.2 Models Be 3D Printed? Mesh Validation

2026/01/27

Can TRELLIS.2 Models Be 3D Printed? Mesh Validation

A practical TRELLIS.2 print-readiness workflow: manifoldness, holes, normals, wall thickness, scale, STL conversion, slicing and small test prints.

TRELLIS.2 in a VFX Pipeline: An Evaluation Checklist

2026/01/27

TRELLIS.2 in a VFX Pipeline: An Evaluation Checklist

A transparent workflow for evaluating TRELLIS.2 output for VFX, previs, set dressing, and production handoff, without any fabricated artist testimonials.

Trellis 2 Quickstart: Your First Image-to-3D Draft

2026/01/27

Trellis 2 Quickstart: Your First Image-to-3D Draft

A truthful five-minute TRELLIS.2 quickstart: sign in, buy credits, start a 512 job, follow live job status, inspect the result, and download a GLB draft.

📝

2025/12/18

TRELLIS.2(trellis-2)完整指南:图像转3D、PBR材质、GLB导出

一篇讲人话的 trellis-2 / trellis 2 / trellis.2 教程:TRELLIS.2 是什么、怎么把图片变3D、哪些图最适合、核心参数怎么选、以及GLB导出后怎么进Blender/Unity。

← Swipe →
Hosted TRELLIS.2 vs Meshy Subscription: Cost Per Accepted...