一次性积分包 $14.90 起

Free 2D-to-3D Reference Studio Rig

Multi-Angle Image-to-3D Reference Prompt & Neutral PBR Lighting Planner

Most failed AI 3D meshes start with a cinematic 2D image: 24mm wide-angle distortion warps depth, neon rim lights stain PBR baseColor maps, and dramatic floor shadows turn into solid plastic skirts. Configure your camera elevation, focal length, and cross-polarized lighting rig below to build a clean reference prompt.

Prompt planning and camera rig diagnostics run instantly in your browser at zero cost. You can copy prompts into any 2D image generator or send the prompt straight into the TRELLIS.2 Studio workspace.

1. Subject Archetype, Camera Angles & PBR Lighting Rig

28°
35°

2. Camera Rig Diagram & Engineered Prompts

3D Reconstruction Readiness: 100/100
Front 0° Reference Axis
Albedo Safety

100/100

Depth Clarity

100/100

Optimal studio geometry and neutral diffuse illumination: exposes front, side, and top planes while keeping PBR albedo free of baked shadows.
Positive Reference Image Prompt

compact brass astrolabe compass with engraved celestial rings, single self-contained game-ready prop asset, readable silhouette, clean bevels and separated mechanical parts, three-quarter isometric studio view showing front, one side, and top planes simultaneously, 28-degree camera elevation, 35-degree front-side azimuth, 85mm studio portrait prime lens, minimal perspective distortion, deep f/16 focus across front-to-back depth, even cross-polarized 360-degree softbox studio illumination, neutral 5600K white balance, zero specular hotspots, shadowless contact, physically plausible painted alloy and brushed metal roughness variation, readable surface wear without baked reflections, isolated on a flat seamless 50 percent neutral studio gray background, centered 1:1 square studio product shot, uncropped full silhouette, ultra-clean edges

Negative Prompt (Shadow & Distortion Guard)

cropped edges, cut off feet or top, harsh cast floor shadow, mirror floor reflection, shallow depth of field, bokeh blur, motion blur, dramatic neon rim light, specular blowout glare, cluttered background props, multiple objects, floating text watermark, fisheye lens distortion, heavy vignette

Recommended 3D step after generating your 2D reference: 1024³ O-Voxel + 2048px PBR (300 credits).

Go to Image-to-3DCredit Pricing

Engineering a 2D Reference Image That Reconstructs Cleanly in 3D

Align camera geometry, illumination neutrality, and silhouette separation before generating your reference image.

1. Expose Three Orthogonal Planes (25°–35° Elevation)

A 3/4 view at ~28 degrees elevation and ~35 degrees azimuth reveals the front, side thickness, and top surface in one frame—giving O-Voxel far stronger depth cues than a flat front shot.

2. Lock 85mm Telephoto or Orthographic Framing

Long focal lengths minimize perspective foreshortening so wheels stay circular, sword blades stay straight, and character heads match body proportions.

3. Enforce Cross-Polarized Diffuse Lighting

Suppress neon rim lights, floor reflections, and cast shadows in both positive and negative prompts so TRELLIS.2 extracts clean, relightable PBR albedo and roughness maps.

Honest Technical Boundaries

  • Even an ideal 3/4 reference image leaves the rear backplate unseen; TRELLIS.2 synthesizes plausible back geometry, which you should inspect in Blender or our GLB Viewer before manufacturing.
  • 2D text-to-image models occasionally ignore negative prompt tokens—always run the generated PNG through the Square Cutout & Glare Heatmap tool before spending 3D credits.
  • Planning and copying prompts here is completely free; running cloud text-to-image or image-to-3D jobs inside TRELLIS.2 Studio consumes account credits.

Image-to-3D Reference Prompting & Lighting FAQ

Why camera focal length, elevation angle, and flat diffuse lighting make or break single-image 3D generation.

Cinematic cyan or magenta rim lights look striking in 2D, but single-image 3D material estimators can mistake colored rim illumination for surface paint—baking permanent neon edges into your GLB baseColor map that clash when relit inside Unity, Unreal, or Blender.

Meshy Hermes Agent Plugin vs Trellis Mini $4.99 Inspect-First GLB

2026/10/31

Meshy Hermes Agent Plugin vs Trellis Mini $4.99 Inspect-First GLB

Meshy Agent/plugin subscription path vs Trellis Mini $4.99/150cr for one 512³ inspect-first GLB. Independent host, not Microsoft. Verified 2026-10-31.

Meshy First-Month ~50% Off vs Trellis Mini $4.99 GLB

2026/10/29

Meshy First-Month ~50% Off vs Trellis Mini $4.99 GLB

Meshy Pro shows ~$10 first month (~50% off). Trellis Mini is $4.99/150cr = one 512³ inspect-first GLB. Independent host, not Microsoft. Confirm checkout.

Print-Ready from Chat (Meshy Agent) vs Inspect-First $4.99 GLB

2026/10/27

Print-Ready from Chat (Meshy Agent) vs Inspect-First $4.99 GLB

Meshy Agent print-ready chat vs inspect-first Mini $4.99/150cr = one 512³ GLB on trellis-2.com. Independent host, not Microsoft. Checklist before slicer.

When You Don’t Need a 3D Agent: First Accepted GLB Checklist

2026/10/27

When You Don’t Need a 3D Agent: First Accepted GLB Checklist

Skip Meshy Agent chat when one photo → one inspectable GLB. Mini $4.99/150cr = one 512³ on trellis-2.com. Independent host, not Microsoft. Checklist first.

Hosted TRELLIS.2 vs Meshy Subscription: Cost Per Accepted GLB

2026/10/26

Hosted TRELLIS.2 vs Meshy Subscription: Cost Per Accepted GLB

One-time never-expire credits on trellis-2.com (150/300/500 per resolution) vs Meshy monthly pools. Compare cost per accepted GLB — independent host, not Microsoft.

📝

2026/10/08

2026 年免费在线 3D 查看器对比:GLB、STL、OBJ、FBX

六种几乎不用安装就能打开的 3D 文件方案,按格式、是否上传、是否要登录和限制对比,包含 TRELLIS.2 的浏览器查看器。

📝

2026/10/04

打印前怎么检查 3D 网格:在浏览器里先做一遍

在把生成的网格转成 STL、送进切片软件之前,先在浏览器里检查一遍:提前发现破洞、翻转的法线和过薄的壁。

📝

2026/10/04

在浏览器里把 GLB 草模转成 STL:会留下什么,会丢掉什么

在浏览器里把 GLB 草模转成 STL,弄清哪些数据留下、哪些数据丢掉,并在切片之前先确认三角面片,避免薄壁在打印时才暴露问题。

📝

2026/10/04

如何在线打开 3MF 文件:先看清包里到底是什么形状

在浏览器里打开 3MF 包,旋转网格,并分清这个文件带有什么、不带有什么,再决定要不要进一个单独的切片步骤。

📝

2026/10/04

如何在线打开 FBX 文件:形体能看,场景不保证

把 FBX 拖进浏览器,旋转查看网格,同时明确这个预览会显示哪些场景数据、不会显示哪些,再决定是否要在别处转换或编辑。

📝

2026/10/04

如何在线打开 GLB 文件:带材质的浏览器预览

在线打开 GLB 文件,包括本站从一张图生成的带纹理草模,并学会在转换或打印之前判断哪些面是模型估算出来的。

📝

2026/10/04

如何在线打开 glTF 文件:先确认 .bin 和贴图有没有一起到

在线打开 glTF 文件,并弄清楚为什么单独的 JSON 会打不开:缓冲区或贴图被落在别处时,先把交付包补全再预览。

📝

2026/10/04

如何在线打开 OBJ 文件:先看网格,再看材质

在浏览器里打开 OBJ 文件,看清楚的只有你拖进来的那个网格;同时知道什么时候该保留 GLB 的贴图、什么时候才需要转成 OBJ。

📝

2026/10/04

如何在线打开 PLY 文件:网格、扫描与点云的区别

在浏览器里打开 PLY 网格或扫描件,顺带看清顶点颜色能显示到什么程度,以及一个只有点、没有面的文件为什么画不成实体。

📝

2026/10/04

如何在线打开 STL 文件:在浏览器里查看三角网格

把 STL 拖进浏览器就能旋转查看三角面片,同时看清为什么预览是灰色、没有打印参数,以及切片前必须自己确认的尺寸和壁厚。

How to Turn a Photo into a 3D Model

2026/10/04

How to Turn a Photo into a 3D Model

Turn one photo into a downloadable GLB draft, then inspect the estimated sides before you convert or print so thin walls and holes show up early on.

Open-Source 3D AI in 2026: A Verification-First Guide

2026/01/27

Open-Source 3D AI in 2026: A Verification-First Guide

Compare hosted trials and open-source image-to-3D models without invented rankings, then check current TRELLIS.2 facts and a cost-per-accepted-asset test.

ComfyUI and TRELLIS.2: A Safe Local Setup Checklist (2026)

2026/01/27

ComfyUI and TRELLIS.2: A Safe Local Setup Checklist (2026)

Official TRELLIS.2 requirements, ComfyUI wrapper limits, install safety, model checks, workflow layout and troubleshooting for local image-to-3D.

Open-Source Image-to-3D: TRELLIS.2 vs Hunyuan3D, TripoSR

2026/01/27

Open-Source Image-to-3D: TRELLIS.2 vs Hunyuan3D, TripoSR

Source-based review of open-weight image-to-3D releases you can run yourself: TRELLIS.2, Hunyuan3D 2.1, TripoSR and Stable Fast 3D, licences included.

TRELLIS.2 to Blender: Import GLB, Inspect, Clean, and Export

2026/01/27

TRELLIS.2 to Blender: Import GLB, Inspect, Clean, and Export

A practical TRELLIS.2-to-Blender workflow for importing the hosted GLB, checking transforms, geometry and PBR materials, then exporting the scene.

TRELLIS.2 Tutorial: From One Image to a Reviewed GLB

2026/01/27

TRELLIS.2 Tutorial: From One Image to a Reviewed GLB

Step-by-step TRELLIS.2 guide: input selection, 512/1024/1536 credit cost, tracked generation, GLB inspection, failure refunds and destination checks.

Can TRELLIS.2 Models Be 3D Printed? Mesh Validation

2026/01/27

Can TRELLIS.2 Models Be 3D Printed? Mesh Validation

A practical TRELLIS.2 print-readiness workflow: manifoldness, holes, normals, wall thickness, scale, STL conversion, slicing and small test prints.

TRELLIS.2 in a VFX Pipeline: An Evaluation Checklist

2026/01/27

TRELLIS.2 in a VFX Pipeline: An Evaluation Checklist

A transparent workflow for evaluating TRELLIS.2 output for VFX, previs, set dressing, and production handoff, without any fabricated artist testimonials.

Trellis 2 Quickstart: Your First Image-to-3D Draft

2026/01/27

Trellis 2 Quickstart: Your First Image-to-3D Draft

A truthful five-minute TRELLIS.2 quickstart: sign in, buy credits, start a 512 job, follow live job status, inspect the result, and download a GLB draft.

📝

2025/12/18

TRELLIS.2(trellis-2)完整指南:图像转3D、PBR材质、GLB导出

一篇讲人话的 trellis-2 / trellis 2 / trellis.2 教程:TRELLIS.2 是什么、怎么把图片变3D、哪些图最适合、核心参数怎么选、以及GLB导出后怎么进Blender/Unity。

← Swipe →